Click here for more deck photos
Customers own decks
3.0 x 3.1m ground deck with corner pergola
4.0 x 4.1m raised deck with pergola with customers own seats, step &
planters
Click here for new raised with pergola deck
prices
4.0x 4.1m and 3.0 x 3.1m raised decks with Modern Square balustrade
RAISED DECK KIT with PERGOLA PRICES
RAISED DECK ASSEMBLY INSTRUCTIONS
GROUND DECK with 45x95mm (2x4"planed joists KIT PRICES
GROUND DECK with 45x145mm (2x6"planed joists KIT PRICES
GROUND DECK ASSEMBLY INSTRUCTIONS
Please note my email address diydeals@hotmail.co.uk if you have any questions please email or telephone Peter Dale 01457 855259.
145mm (6") wide Grooved Decking x 28mm
finished thickness Pine (called
redwood in the trade) in 3 lengths 3.0m (9'10"), 4.0m (13'2") & 5.0m (16'5")
is sold by the length or in kits.
All
timber (decking, joists, posts and
balustrade and pergola) is pressure preserved.
Click here for timber prices Click here for blow ups of both faces
Ground deck kits include: all necessary deck boards, joists and deck screws. Corner brackets with screws are also supplied to join the joists together.
Click here for ground deck prices with 45 x 95mm (4") joists
Click here for ground deck prices with 45 x 145mm (6") joists
Raised deck kits include: all necessary deck boards, joists, deck screws, joist hangers, corner brackets, posts, bolts and a drill bit for the bolts. Post Anchor are available as optional extras for those who wish to use this secure way of fixing.
Click here for raised deck prices
Click here for raised with pergola deck prices
Over 10,000 deck kits have been sold in the last 9 years using the DIYdeals raised & ground deck systems.
The advantages of DIYdeals' design of RAISED deck kits are:
Longer life - as when using the post anchors no timber is directly in contact with the ground, where most rot occurs, and, as all timber is pressure treated, the raised decks will last for 25+ years.
We offer 45mm x 145mm (2" x 6") Planed Timber for all joists which enable strong raised decks with easier fixing of decking screws - or you can use deckboards on edge for joists for a cheaper option. Joists come in 4 sizes 2..0m (6'7"), 3.0m (9'10"), 4.0m (13'2") & 5.0m (16'5"), which can be cut down to suit your deck size.
No site levelling required - support joists are levelled using only 4, 6 or 9 (or more on the combined decks) timber posts, depending on the size of the deck, which can anchored to the ground with metal post anchors (optional), which keep timber posts off the ground and ensure the deck is anchored to prevent uplift during strong winds.
GROUND decks do not require posts, anchors or bolts and require fewer joists - they are therefore less expensive than raised decks. They have the joists resting on the ground which reduces the life of the deck to 15+ years. Ground decks may use 45mm x 95mm (2" x 4") or 45mm x 145mm (2" x 6") as joists.
Deck boards have 9 grooves on one side and have a combed effect on the reverse enabling boards to be used either way.
Spacing of deck boards should be 149mm to150mm from the front on the deck board to the front of the next - this will leave a gap of 4mm to 8mm depending on the dryness of the deck boards which when wet will measure 146mm and when dry will be 142mm.
Choice of 225 standard RAISED deck sizes using 45mm x 145mm and 9 sizes using deck boards on edge- There is also listed 9 raised decks with pergola.
Choice of 225 standard GROUND deck sizes in both 95mm (4") & 145mm (6")- All the ground decks use corner brackets for joining joists and decking screws for fixing deck boards to the joists.
You may wish to cut these sizes down to make a smaller deck. Deck kits may also be joined together to form a larger deck.
The lists of standard ground deck kit prices & raised deck kit prices are for your guidance and show what is included in each of the decks. These Standard decks use the timber as supplied with little or no cutting.
DIYdeals Colonial Balustrade is compatible with raised or ground decks - the one piece Colonial Newel Post with ball top machined in the newel post accompanies the matching spindles.
DIYdeals Square Balustrade can also be used as an alternative with plain spindles.
DIYdeals Pergola Posts can also be used to accommodate Balustrade
Click here for prices of all balustrade
The balustrade assembly uses a top infill rail which is covered by a top rail with no visible screws on the spindles or rails - No unsightly rust. it is adaptable - it can be used to cover 2 or three full sides, 1 or 2 full sides with 2 half sides. To ensure Safety - Balustrades are designed so that there are no gaps bigger than 100mm. They should be used on all decks when there is a drop over 300mm. For a 3.0m side use 2 panels each containing 12 spindles - for a 4.0m side use 2 panels each containing 17 spindles - for a 5.0m side use 3 panels each containing 13 spindles.
The delivery charge will be £40 for delivery to most of mainland England, Wales and Scotland to the M8, M9 & M90 corridors, up to Perth, and including Fife. The delivery charge is £70 for mainland Cornwall and the A9 corridor from Perth to Inverness.
Delivery usually takes 2 to 10 working days. Scotland & Cornwall maybe up to 4 weeks.
To place an order simply email diydeals@hotmail.co.uk or call 01457855259 stating your requirements, your full address including postcode and a contact telephone number for our carrier, Tony Hancock, who will call you with a delivery day and a 2 hour time slot.
Payment cash on delivery (C.O.D) or via Paypal or by cheque with order, Please make cheques payable to Peter Dale and allow 5 days for clearance from receipt
Any questions contact Peter Dale diydeals@hotmail.co.uk or call 01457 855259