DIYdeals supplies a range of quality timber decking balustrade kits with assembly instructions with three spindle designs;
Square (available in two sizes 760mm x 27mm and 895mm x 32mm),
Rectangular (760mm 27mm x 63mm) which can be used 3 ways - with the narrow side facing, with the wider side facing or set at an angle
Colonial Turned (760mm x 41mm). 

The 1100mm wide x 760 high 'cross hatch' and 'sunrise'  panels can be included as a feature with any of the spindles (see prices below each spindle design).

Balustrade kit prices are shown for a run of 1m, 1.3m, 1.5m, 1.8m, 2.0m, 2.5m & 3.0m so that 2 x 1.5m sections (or 1 x 3m) will fit the 3.0/3.1m for a raised deck or a ground deck,  2 x 2m sections for the 4.0/4.2m & 2 x 2.5m sections the 5.0/5.1m.  If there is a centre newel post on the sides (3.1m,4.2m,5.1m) you will need to use noggins to support the newel posts)


All outdoor timber is pressure treated.
 

The delivery charge will be £40 on all orders.  There is no delivery charge when ordered as extras (for delivery at the same time) with any DIYdeals decking kits for delivery to mainland England (excluding Devon & Cornwall), Wales and Scotland up to the M8 corridor including Glasgow & Edinburgh.  This delivery charge is for any quantity of deck boards, balustrade, pergola or joist timbers when ordered without a kit. Delivery usually takes from 1 to 10  working days. Southern Scotland & South West Wales may be up to 3 weeks, but for most of the season we manage within 1 to 10 working days..
 

To place an order or ask any questions simply email diydeals@hotmail.co.uk, call 01457 855259 or text/sms 07866 767863 stating your requirements, your full address including postcode and a contact telephone number for our carrier, who will call you with a delivery day and a 2 hour time slot. 

 

Payment cash on delivery, credit card, by bank transfer or via Paypal.

This list of balustrade kits is for your guidance and shows what is included in each of the balustrade kits -

>balustrade assembly instructions

Revised 15th January 2012
Listed below are the prices and details of the DIYdeals Decking Balustrade kits
Balustrade kit with:
1 x 90mm square newel post & 895mm x 32mm square spindles

 Width

A=895mm x 32mm spindles
B=2.0m Rails C=3.0m rails

square balustrade

 Price Inc VAT
A B C  
1.0m 7 1     90BS10 £25.00
1.3m 10   1   90BS13 £30.50
1.5m 12   1   90BS15 £32.00
1.8m 15 2     90BS18 £37.50
2.0m 17 2     90BS20 £39.50
2.5m 22   2   90BS25 £50.00
3.0m 27   2   90BS30 £54.00

Extra post with 2 x 220mm bolts

BSNP2B £10.00

200mm x 11mm Drill bit

DBB1 £10.00

Extra 32mm x 32mm x 895mm Square Spindles each

90SqSp1 £1.00
Balustrade kit with:
1 x 90mm square newel post & 895mm x 32mm square spindles with sunrise or crosshatch panel insert 1170mm x 760mm
A spindle is placed either side of the centred panel leaving a gap of 67mm top & bottom, fixed with 4 x 50mm screws into spindle.

 Width

A=895mm x 32mm spindles
B=2.0m Rails C=3.0m rails
D= 'cross hatch CH' or 'sunrise SR' panels

 Price Inc VAT
A B C D
1.5m 4   1 1 90BS15CH1 or 90BS15SR1 £50.50
1.8m 6 2   1 90BS18CH1 or 90BS18SR1 £55.50
2.0m 8 2   1 90BS20CH1 or 90BS20SR1 £57.00
2.5m 14   2 1 90BS25CH1 or 90BS24SR1 £68.50
3.0m 18   2 1 90BS30CH1 or 90BS30SR1 £71.50
3.0m with
2 panels		 7   2 2 90BS30CH2 or 90BS30SR2 £88.00

Extra post with 2 x 220mm bolts

BSNP2B £10.00

200mm x 11mm Drill bit

DBB1 £10.00

Extra 32mm x 32mm x 895mm Square Spindles each

90SqSp1 £1.00
Balustrade kit with:
1 x 90mm square newel post & 760mm x 27mm square spindles

 Width

A=760mm x 27mm square spindles
B=2.0m Rails
C=3.0m Rails

27mm square balustrade 760mm high

Price Inc VAT
A B C  
1.0m 7 1     76BS10 £23.00
1.3m 10   1   76BS13 £28.00
1.5m 12   1   76BS15 £29.00
1.8m 15 2     76BS18 £34.00
2.0m 17 2     76BS20 £35.00
2.5m 22   2   76BS25 £44.50
3.0m 27   2   76BS30 £47.50

Extra post with 2 x 220mm bolts

BSNP2B £10.00

200mm x 11mm Drill bit

DBB1 £10.00

Extra 27mm x 27mm x 760mm Square Spindles each

76SqSp1 £0.75

Extra 27mm x 27mm x 760mm Square Spindles pack of 9

76SqSp9 £5.00
Balustrade kit with:
1 x 90mm square newel post & 760mm x 27mm square spindles with sunrise or crosshatch panel insert 1170mm x 760mm
The panels are fixed to the bottom rail and the top infill / top rail, fixed with 4 x 50mm screws.

 Width

A=760mm x 32mm spindles
B=2.0m Rails C=3.0m rails
D= 'cross hatch CH' or 'sunrise SR' panels

 Price Inc VAT
A B C D
1.5m 2   1 1 76BS15CH1 or 76BS15SR1 £48.50
1.8m 4 2   1 76BS18CH1 or 76BS18SR1 £52.50
2.0m 6 2   1 76BS20CH1 or 76BS20SR1 £54.00
2.5m 12   2 1 76BS25CH1 or 76BS24SR1 £64.00
3.0m 16   2 1 76BS30CH1 or 76BS30SR1 £66.00
3.0m with
2 panels		 3   2 2 76BS30CH2 or 76BS30SR2 £83.50

Extra post with 2 x 220mm bolts

BSNP2B £10.00

200mm x 11mm Drill bit

DBB1 £10.00

Extra 27mm x 27mm x 895mm Square Spindles each

76SqSp1 £0.75
Balustrade kit with:
1 x 90mm square newel post & 760mm x 27mm x 63mm spindles

 Width

A=760mm x 27mmx 63mm rectangular spindles
B=2.0m Rails  C=3.0m Rails

 

Price Inc VAT
A B C  
1.0m 7 1     76BR10 £25.00
1.3m 10   1   76BR13 £30.50
1.5m 12   1   76BR15 £32.00
1.8m 15 2     76BR18 £37.50
2.0m 17 2     76BR20 £39.50
2.5m 22   2   76BR25 £50.00
3.0m 27   2   76BR30 £54.00

Extra post with 2 x 220mm bolts

BSNP2B £10.00

200mm x 11mm Drill bit

DBB1 £10.00

Extra 27mm x 63mm x 760mm Rectangular Spindles each

76RSp1 £1.50

Extra 27mm x 63mm x 760mm Rectangular Spindles pack of 8

76RSp9 £8.00
Balustrade kit with:
1 x 90mm square newel post & 760mm x 27mm x 63mm spindles with sunrise or crosshatch panel insert 1170mm x 760mm
The panels are fixed to the bottom rail and the top infill / top rail, fixed with 4 x 50mm screws.

 Width

A=760mm x 27mm x63mm rectangular spindles
B=2.0m Rails C=3.0m rails
D= 'cross hatch CH' or 'sunrise SR' panels

 Price Inc VAT
A B C D
1.5m 2   1 1 76BR15CH1 or 76BR15SR1 £50.50
1.8m 4 2   1 76BR18CH1 or 76BR18SR1 £55.50
2.0m 6 2   1 76BR20CH1 or 76BR20SR1 £57.00
2.5m 12   2 1 76BR25CH1 or 76BR25SR1 £68.50
3.0m 16   2 1 76BR30CH1 or 76BR30SR1 £71.50
3.0m with
2 panels		 3   2 2 76BR30CH2 or 76BR30SR2 £88.00

Extra post with 2 x 220mm bolts

BSNP2B £10.00

200mm x 11mm Drill bit

DBB1 £10.00

Extra 27mm x 63mm x 760mm Rectangular Spindles each

76RSp1 £1.50

Extra 27mm x 63mm x 760mm Rectangular Spindles pack of 8

76RSp8 £8.00
Balustrade kit with:
1 x 90mm square newel post & 760mm x 41mm colonial spindles

 Width

A=760mm x 41mm colonial spindles
B=2.0m Rails
C=3.0m Rails

Price Inc VAT
A B C  
1.0m 7 1     76BC10 £25.00
1.3m 10   1   76BC13 £30.50
1.5m 12   1   76BC15 £32.00
1.8m 15 2     76BC18 £37.50
2.0m 17 2     76BC20 £39.50
2.5m 22   2   76BC25 £50.00
3.0m 27   2   76BC30 £54.00

Extra post with 2 x 220mm bolts

BSNP2B £10.00

200mm x 11mm Drill bit

DBB1 £10.00

extra 41mm x 41mm x 760mm Colonial Spindles each

76ColSp1 £1.50

extra 41mm x 41mm x 760mm Colonial Spindles pack of 8

76ColSp8 £8.00
Balustrade kit with:
1 x 90mm square newel post & 760mm x 41mm colonial spindles with sunrise or crosshatch panel insert 1170mm x 760mm
The panels are fixed to the bottom rail and the top infill / top rail, fixed with 4 x 50mm screws.

 Width

A=760mm x 41mm colonial spindles
B=2.0m Rails C=3.0m rails
D= 'cross hatch CH' or 'sunrise SR' panels

 Price Inc VAT
A B C D
1.5m 2   1 1 76BC15CH1 or 76BC15SR1 £50.50
1.8m 4 2   1 76BC18CH1 or 76BC18SR1 £55.50
2.0m 6 2   1 76BC20CH1 or 76BC20SR1 £57.00
2.5m 12   2 1 76BC25CH1 or 76BC25SR1 £68.50
3.0m 16   2 1 76BC30CH1 or 76BC30SR1 £71.50
3.0m with
2 panels		 3   2 2 76BC30CH2 or 76BC30SR2 £88.00

Extra post with 2 x 220mm bolts

BSNP2B £10.00

200mm x 11mm Drill bit

DBB1 £10.00

extra 41mm x 41mm x 760mm Colonial Spindles each

76ColSp1 £1.50

extra 41mm x 41mm x 760mm Colonial Spindles pack of 8

76ColSp8 £8.00

Balustrade Kit prices include 1 Newel post, Top & Bottom Rails, Top infill rail and a Fixing kit  containing 2 bolts with nuts & washers, 4 corner brackets with screws & 4mm x 50mm screws for fixing spindles to bottom rail and top infill rail. To finish off a run you will require an extra newel post.  
Please note that the bottom rail has the grooves pointing downwards and the infill rail is used only has a top infill rail until the top rail covers it.

N.B. for the raised decks with no noggins and all the ground decks you will also need a centre noggin 45mm x 95mm x width of deck with fixings - you will also require a drill bit for the bolts if ordering with a ground deck.